Home Company Products News Private area Contacts
 

Brushless Drives

Servo drives with high technological content and reliability for the maximum enhancement of brushless motor performance.
Brushless Drives DGM460

Brushless Drives: DGM460

Intelligent digital brushless servo drive with input from 300 to 460V AC for the control of motors of up to 72 Nm. Control via ModBus, CanOpen (DS402) or PROFIBUS interface.

Brushless Drives DGM240

Brushless Drives: DGM240

Intelligent digital brushless servo drive, single and three-phase power supply from 150 to 240VAC or DC bus. For control of motors of up to 15 Nm. Control also possible via ModBus, Profibus and CanOpen (DS402) interface.

Brushless Drives TomCat460

Brushless Drives: TomCat460

The TomCat460™ (TMC460™) are bidirectional sinusoidal four-quadrant brushless drives, with internal braking switch, supplied with 400/460VAC 3Phases, for the control of brushless servomotors and DC servomotors with rated current up to 3Amps.

Brushless Drives TomCat240 Evo

Brushless Drives: TomCat240 Evo

The TomCat240EVO™ (TMC240Evo™) are bidirectional sinusoidal four-quadrant brushless drives, with internal braking switch, supplied with 220/230VAC 1Ph and 3Ph, for the control of linear and rotative brushless servomotors and DC servomotors with rated current up to 6Amps.

Brushless Drives DGFox 60 Evo

Brushless Drives: DGFox 60 Evo

Digital sinusoidal brushless servodrives, 60VDC power supply. Control of low voltage AC brushless servomotors and DC permanent magnet servomotors with current up to13A. Control is possible via Modbus, CanOpen,EtherCat Coe, ProfiNet RT ,pulse/direction and analog signal.

Brushless Drives TomCat240

Brushless Drives: TomCat240

The TomCat240™ (TMC240™) are bidirectional sinusoidal four-quadrant brushless drives, with internal braking switch, supplied with 220/230VAC 1Ph and 3Ph, for the control of brushless servomotors and DC servomotors with rated current up to 6Amps.

Brushless Drives DGFox 60

Brushless Drives: DGFox 60

Digital sinusoidal brushless servodrives, 60VDC power supply. Control of low voltage AC brushless servomotors and DC permanent magnet servomotors with current up to13A. Control is possible via Modbus, CanOpen, pulse-direction and analog signal.

 
HDT group srl   |   Via Sile, 8 - 36030 Monte di Malo - ITALY - (VI)
Copyright © 2012. All rights reserved